Damage Free Sheet Metal Surface Protection Film For Color Steel Panel
The painted metals industry utilizes many types of topcoat paint systems including PVDF(Polyvinylidene fluoride), Kynar, Polyester, plastisol,Polyurethanes,SMP, and new appliance coatings (anti-fingerprint, tinted stainless and more). Adhering to and protecting these, and soon to be developed, systems is a challenge we have met time and time again. With the right film type and adhesion, our protective films will protect the painted surface during all the stages of fabrication, assembly and shipment, and remove cleanly from the surface when the job is done. Our experience is in protecting a wide range of painted metal surface including:
· Curtain walls
· Building panels
· Coil coating
· Automotive clear coat
Just tell us what is your painted surfaces
We will customize different viscosities for you according to your different surfaces. Produce the protective film suitable for your products for you. While protecting your product, it will not negatively affect its surface. Greatly improve your work efficiency.
What can we offer you?
► We use 100% virgin raw material.
► Good antistatic ability
► provide 3 color printing
► Leave no residue on the paint
► OEM & ODM are available
► Stable viscosity,easy peeling
► good wettability.
► Free sample is provide
|Usage||Provide a protective barrier to scratch, mark, damage and dirt at the process|
|of bending, pressing, punching, cutting, drilling, milling, roll forming,|
|transportation and installation.|
|Base Material||Polyethylene (PE)|
|Glue||Water-based acrylic glue/ solvent-based acrylic glue / Natural rubber|
|Color||Transparent, blue, white, black and white, green and so on.|
|Thickness||30-150 microns||Widely used||35/45/50/70/80/100 microns|
|Width||100-2000 mm||Widely used||1000/1100/1220/1250 mm|
|Length||100-2000 m||Widely used||200m, 500m, 100m|
|180˚ Peel Strength||20-500 g/25mm||Widely used||150/200/250/350 g/25mm|
|Tensile Strength||Trasv> 8N/25mm|
|Load test:||360 hours under the temperature of 25℃-50℃, the film bears the load of /SPCM2. After being peeled off, there is no residue on substrate’s surface.|
|UV resistance aging test: .||Under the temperature of 50℃, be irradiated for 60 hours by 300w ultraviolet lamp, the film keeps its shape. No residue after being peeled off|
|Paste performance test:||a. Bending with substrate in 90 degree, the film has no break and doesn’t fall off.
b. Leave no residue on the paint film surface after being peeled off.
|Moisture resistance aging test:||60℃ + 80% for 240 hours, the film doesn’t fall off and there is no residue or corrosion after being peeled off.|
Contact Us at Any Time